Index of /~narbo/zx3/iceman-howto

	Name	Last modified	Size	Description
	Parent Directory		-
	Before Install.jpg	16-Aug-2000 01:21	194K
	Completed Install Pic 1.jpg	16-Aug-2000 01:22	197K
	Completed Install Pic 2.jpg	16-Aug-2000 01:22	201K
	Completed Install Pic 3.jpg	16-Aug-2000 01:22	198K
	Step 1 - Remove Battery Cover, Tiedown and Battery.jpg	16-Aug-2000 01:22	206K
	Step 2 - Clip Tiewraps.jpg	16-Aug-2000 01:25	178K
	Step 3 - Remove Battery Box.jpg	16-Aug-2000 01:25	202K
	Step 4a - Pull Out Plastic Rivet Holding Plug For Block Heater.jpg	16-Aug-2000 01:25	194K
	Step 4b - Most Effectively Done By Clipping Stock Intake.jpg	16-Aug-2000 01:25	179K
	Step 5 - Undo Other Screws And Remove Baffle.jpg	16-Aug-2000 01:26	195K
	Step 6 - Remove Air Scoop From Intake.jpg	16-Aug-2000 01:26	200K
	Step 6 - Remove Piping From Throttlebody.jpg	16-Aug-2000 01:26	198K
	Step 7 - Yank Out Air Box.jpg	16-Aug-2000 01:26	203K
	Step 8 - Remove Remaining Stock Intake Piping and Gromett.jpg	16-Aug-2000 01:27	198K
	Step 9 - Install Iceman Air Scoop (Use Screws To Reattach).jpg	16-Aug-2000 01:27	188K
	Step 10 - Depsite Instructions Use Two Hose Clamps To Join.jpg	16-Aug-2000 01:23	198K
	Step 11- Replace Stock Airbox (Snaps Back In).jpg	16-Aug-2000 01:23	189K
	Step 12 - Replace Air Filter.jpg	16-Aug-2000 01:23	185K
	Step 13 - Attach Air Sensor To Airbox Cover.jpg	16-Aug-2000 01:23	198K
	Step 14 - Attach Piping To Airflow Sensor (Use 2 Hoseclamps).jpg	16-Aug-2000 01:24	194K
	Step 15 - Fit on Gasket And Line Up Pipe To Throttlebody .jpg	16-Aug-2000 01:24	190K
	Step 16a - Use 2 Hoseclamps To Affix Piping To Throttlebody.jpg	16-Aug-2000 01:24	191K
	Step 16b - Had Troble Alligning Them Best Fit We Could Get.jpg	16-Aug-2000 01:24	190K
	web/	17-Aug-2000 11:22	-